Page
8 / 43
Documentation
DPM
Operating manual for precision cutting machine
Approved on: 23/02/2017
Approved by: M. Kieble
3. Safety
3.1 Safety directives and regulations
The following general safety regulations must be followed:
Commissioning, operation and maintenance only after briefing and
instruction by the owner and knowledge of the operating manual.
Commissioning, operation and maintenance only by trained and
qualified personnel (protective goggles and safety shoes are
mandatory)
When switching on the machine, the direction of rotation of the cup
wheel must be clockwise and that of the cutting wheel must be counter-
clockwise, see also instructions under 5.2 Connections of the machine
Only switch on once you have checked the safety devices function
correctly.
Do not tamper with any safety devices or bypass, deactivate or
remove them.
The accident prevention regulations must be observed, and all working
methods that can jeopardise work safety are prohibited.
3.2 Safety hazards
Potential hazards if the operating manual is not followed:
