Page
34 / 43
Documentation
DPM
Operating manual for precision cutting machine
Approved on: 23/02/2017
Approved by: M. Kieble
Caution! Only work with the emergency stop actuated!
To set the dressing diamond to the
desired position relative to the cutting
wheel, the adjustment plate (optional)
is screwed on to the spindle instead of
the cutting wheel. The possible
adjustment size is 0.1mm or 0.15mm
to the cutting wheel. The adjustment
plate should be mounted accordingly.
Now, using the rocker function, the
adjustment plate is drawn to the
dressing diamond and this is screwed
on and then secured with the tip up to
the set surface. Caution! After the
adjustment is made, the cutting
wheel and the disc cover must be
re-mounted!
Diamond setting for dressing the cup wheel (with adjustment plate)
Dressing
diamond
300.00.00411 Adjustment plate
for dressing diamond (optional)
0.1mm
0.15mm
Disassemble the right disc cover!
Diamond setting for dressing the cup wheel (without adjustment plate)
A
p
p
ro
x
.
0
.1
m
m
Place the dressing diamond
approx.0.1mm before the cutting
wheel
Caution: Only adjust the cup
wheel when the motor is running,
otherwise the belt will break!
