Metz mecastudio TL-300, Operating Instruction, Page: 85 / 150

85
If the tone is switched off, then a switched
on modelling lamp goes off automatically
after a flash until the next time the flash is
ready.
6.4 Touch display settings
6.4.1 Screen display duration
(BL Auto off)
The screen can be configured so that it is
illuminated after a change has been made
for a period of 30 or 120 seconds or
permanently.
Setting procedure
• Press the button and open the menu.
• Press the sensor button on the touch
display.
• Press the sensor buttons on the
touch display and select .
• Press on the touch display and select the
settings menu.
• Press the sensor button on the
touch display and then select 30 seconds,
120 seconds or “Bl on”.
The setting is adopted immediately
D
BL Auto off
6.4.2 Brightness
The screen brightness can be changed to one
of nine different levels.
Setting procedure
• Press the button and open the menu.
• Press the sensor button on the touch
display.
• Press the sensor buttons on the
touch display and select .
• Press on the touch display and select the
settings menu.
• Press the sensor buttons on the
touch display and select the desired
brightness between 1and 9.
The setting is adopted immediately
D
Brightness
+
BL Auto off
Contrast
Rotation
Brightness
30 S
Bl on
120 S
BL Auto off
Contrast
Rotation
Brightness
Brightness
4
k