15
13.
After proper tensioning of the blade, as instructed a little (Blade Adjustment Procedure),
retighten the blade tensioner nut;
14.
Insert the cover of the tensioner by fastening it with the screws;
15.
Assemble the door again, fitting the left side in the supports and fixing the right side with
the screws.
ATTENTION!
Check the ideal tension of the blade before starting the cutting process, because when the
tension is insufficient, cutting deviations occur and premature wear of the blade. Excessive
tension, in turn, can cause the blade to break.
•
Adjustment
/ Tensioning Belt Procedure:
1.
Disconnect the
equipment
from the mains;
2.
Remove the back cover of the
equipment
by unscrewing the 04 screws;
3.
To move the engine, loosen or tighten the 04 screw located on the engine support;
4.
Move the motor by adjusting the belt tension; To fix the motor in the ideal position tighten
tightly the screws.
