6
3. Installation
3.1 Equipment Layout
The connection to the mains and the arrangement for operation must be carried out by a
qualified professional. Check that the equipment voltage matches the mains voltage.
In the installation, it is essential to make this manual available to the professionals who will
do the work;
To facilitate transport, the equipment is packed with the feet disassembled. They accompany
the equipment with the screws, washers and nuts that will be used to fix the parts. Use the star
wrenches to tighten the screws.
Following is the parts list and mounting position:
Spare Parts List of the Feet
Position
ão
Description
Quantity
1
Front Traverse and Rear Feet
02
2
Side Traverse of the Feet
02
3
Side Structure of the Feet
04
4
Hexagonal Screw M6
28
5
Flat Washer 1/4"
52
6
Hexagon Nut M6
24
7
Rubber Foot
04
After fixing the equipment on the feet, the equipment must be positioned in a sufficiently wide
area, with a well-leveled, dry and stable floor, away from heat sources and water taps, and in a place
where there is no heavy traffic of people. Install your equipment leaving a free area at the front and a
distance of at least 50 cm on the sides and rear, so that it has enough space for inspection,
maintenance, cleaning and use.
