METVISA LQ.10 Series, Instruction Manual

Page: 9 / 20

9
• Before plugging in your device, always lock the cover with the overcap on the cup;
• To start processing, press the on/off button in the "1" (on) position;
• To add ingredients during processing, remove the overcap by turning it counterclockwise and pulling
it up vertically. Use the opening in the cover without needing to remove it;
• Allow time necessary to process food properly;
• After the process is completed, turn the device off by pressing the on/ off button in the "0" position
(off) and remove the device from the socket.
IMPORTANT
When processing a liquid that is hot, remove the overcap to allow steam to escape. For your
safety, the temperature of the processed products must not exceed 40° C.
If food sticks to the wall of the cup, turn off the appliance and unplug the device from the
socket. Use a spatula to remove food from the wall of the cup.
To add ingredients or for viewing the food being processed, remove only the overcap.
Never turn on the device with the cup uncovered, and also don't remove the cup while the
device is in operation.
ATTENTION!
Do not put your fingers, hands or objects (such as spoons and knives) into the glass as this
may cause accidents.
ATTENTION!
Do not leave the appliance running for more than 3 uninterrupted minutes. If processing has
not finished after that time, let it stand for 10 minutes before putting it back into operation.
To avoid damaging the device, never turn it on with the glass empty.
Ice crushing is not recommended. For grinding of solid foods add liquid, otherwise
overheating may occur, damaging the cup sealing system, wear and/or breaking of the
blades and other components of the device.
If you notice that the device
cannot process the food or that it stops processing, decrease
the amount or size of the food in the pre-cut before inserting it into the cup.
Failure to comply with these guidelines will be considered an unsafe act and abusive use of
the device.
In the case of any irregularities contact your nearest authorized service center.