METVISA LQ.10 Series, Instruction Manual

Page: 11 / 20

11
ATTENTION!
Take care when cleaning the cup, because the blades are extremely sharp. Handle with care,
otherwise it could cause accidents. The same attention is paid to any other sharp
component of the device.
IMPORTANT
The manufacturer shall not be liable for any direct or indirect damages caused by non-
compliance with these standards and instructions presented in this manual.
ATTENTION!
It is extremely important that the products used in the cleaning ensure maximum
cleanliness and are not toxic.
5.2 Maintenance and Procedures in Case of Malfunctions
The operator must be instructed to perform routine inspections, making minor adjustments,
the cleaning and to observe signs of breakdowns that could occur. Examples include: checking for
extraneous noise; loss of power of the appliance; the non-performance by the appliance of the service
to which it proposes; among others. Actions such as these are essential to ensure a longer equipment
life.
ATTENTION!
When maintenance is made (even if small adjustments), always unplug the appliance from the
mains.
ATTENTION!
The blades may be re-sharpened when they lose their cut. To do this, contact the nearest
technical assistance.
It is recommended to carry out preventive maintenance every 6 months, checking and
adjusting clearances, cleaning internal parts, etc.. When detecting broken or malfunctioning parts,
always replace using original parts.
By carrying out preventive maintenance, the inconvenience of keeping the device still when
needed most is eliminated, the cost of maintenance is reduced and the risk of accidents is reduced.