69
A. Remote Testing
A.1
Connection Setup
On conducting RFC 2544 remote testing, it is necessary to use two
Bercut-
MMT
deices. These interfaces should be fully configured to work with the
network, i.e. should be configured to transmit data over different network
protocols, including ssh [7].
Connection with a remote device should be established using
Connection
manager
program:
O-Menu
⇒
Settings
⇒
Connection manager
.
Figure A.1. Connection Setup
The
Login
field should be populated with the user name that is registered
at the remote device (Figure A.1). The
Host
field should be populated with
IP address (host) or remote
Bercut-MMT
name (hostname). Connection
setup is performed by pressing the
Connect
button. When connection with
remote
Bercut-MMT
is established for the first time (for specified user name
at remote
Bercut-MMT
), a message will be displayed with public key and
request to confirm proceeding with connection setup (answers are
yes
,
no
),
Bercut-MMT: Ethernet Networks Analysis
Summary of Contents for Bercut-MMT
