metrotek Bercut-MMT, Operation Manual

Page: 59 / 85

59
10. Network Interfaces Information
The Network Interfaces Information application enables data retrieval
about port parameters, SFP modules parameters and copper cable character-
istics. It is possible to retrieve for each Ethernet interface information about
connection rate, data transfer modes, autonegotiation mode state.
This application is launched with corresponding icon at the desktop, or
via main menu in the following order:
O-Menu
⇒
Ethernet Testing
⇒
Net Interfaces Information .
SFP module information includes following parameters: manufacturer
name, model, operation modes supported.
Copper cable diagnostics supports standard faults detection (cable cut,
short circuit), polarity, twisted pairs crossing detection, and also cable length
measuring.
To retrieve network interfaces data, it is necessary to connect SFP mod-
ule and to select interface from the drop-down list in upper left corner of a
application (Figure10.1):
Figure 10.1. List of Interfaces
10.1 Interface Status
An application screen displays a table with information about interface state
(Figure10.2):
Bercut-MMT: Ethernet Networks Analysis