27
6 Check Out Procedure
Perform this instrument checkout procedure on a lawn prior to field site use. If grass or
dirt is not available, indoor carpeting may be used.
1 Check
the
Batteries.
Turn the Transmitter “ON”. The transmitter LCD will display the battery charge
status. (If the indicator does not show at least 5 bars replace of recharge the
batteries.) Turn the Transmitter “OFF”.
Turn the A-Frame Receiver “ON”. The solid bars indicate the battery level. If
only one bar appears, replace the battery (1 each, 9 volt). The battery status is
“ON” for 3 seconds at turn on.
2
Connect the Test Cables.
Connect the test cables to the external OUTPUT JACKS. Red cable to red jack,
nd black cable to black jack. See
Figure 6-1
.
Figure 6-1: Checkout Test Set-Up
Figure 6-1: Checkout Test Set-Up
