DL2
78
15 FAILURE SYMBOLS
Fault situation related to a particular channel are marked with a relevant symbol on the
display:
--------
Channel switched off, the symbol is displayed in the trend and collective
tables window, for the switched off channels the single result window is not
displayed.
---W---
Wait, value not available - it is displayed when the channel is connected to
the input which has not been yet configured. It is usually displayed in the
beginning of the device operation.
---||---
Circuit break, concerns only the current modules set to 4-20mA mode.
---E---
Value out of the range (exceeded) for the input card.
--ERR--
Measurement error due to reason other than those referred to above.
Summary of Contents for DL2
Page 47: ...DL2 47 Notes ...
Page 48: ...DL2 48 Notes ...