Metronic 450908, Installation Manual

Page: 20 / 28

L
Orientation adjustment
• Put the receiver on the Atlantic Bird 3 reference
(1)
channel.
• Check in diagram the Atlantic Bird 3 angular reading of
your geographical area.
• Give
(6)
a satellite number to Atlantic Bird 3 (put 01 in
case you hesitate).
• If the motor does not stop at the right value, bring it with
a continuing research
(4)
or step by step
(5)
.
• Memorised
(7)
this position for Atlantic Bird 3.
Leave all the menus and check that you correctly receive
the Atlantic Bird 3 reference channel
(3)
. If it is not the case,
you have 2 cases:
Primary case: You do not receive anything at all, even
when you slightly move the satellite dish alignment. In
that case, it means that an error has been made during the
installation (mast not vertical, error between east and West,
bad reading of the azimuth…). Restart the installation from
the beginning while checking the details very carefully.
Secondary case: You have a bad reception and you have
to adjust slightly the satellite dish position angle (1 or 2
degrees) to receive correctly Atlantic Bird 3. In that case,
the design curve of the motor is out of line with the real
curve. We then advise you to go back to the step K while
putting 2° more for the Hotbird position in your area. If the
result is not good, try 2° less.
18
0 208 994 11 81
(2)(3)(4)(5)(6)(7)
Go to correspon-
ding paragraph page 2 and 3