Metronic 450908, Installation Manual

Page: 4 / 28

4 - Continuing rotation
Some receivers have 2 methods of rotation: a normal rotation to
make the motor spin, and a rotation step by step to sharply adjust the
position. If your receiver gives you only one method, consider that it is
the continuing rotation.
During the spin, a power and quality indicator indicates the reception
level.
Note:
The size of the level indicator does not have a real importance
as such. What is important it is the variation when you move
the dish or the motor. When the level is going up a bit, stop the
spinning to check if the quality level has increased.
5 - Step by step rotation
If your receiver has the step-by-step rotation, you will be able to adjust
precisely the motor position. If it is not the case, try to reach as precise-
ly as possible the desired angle with a continuing rotation. It is useful to
keep the degree order precision.
1 - Put the receiver on the reference satellite channel
If the receiver is pre programmed, put it on the satellite channel you
want. Choose preferably a channel with a high debit (SR), which means
greater or equal to 22 000.
2 - Go into the DiSEqC 1.2 menu
This menu allows you to make the motor spin. Sometimes, to access it,
it will be necessary to activate the DiSEqC 1.2 function.
3 - Reset the motor
It is the reboot of the motor. Sometimes, this function is called
Reference position
or
Zero position
.
2
0 208 994 11 81