28
Application Creation
Bar code properties (cont.)
Plessey
A variable length, numeric-only bar code type. Each symbol is framed by a start and a
stop pattern and contains a check character that is calculated from the values of each of
the encoded data digits.
Telepen
Telepen is the only bar code type to directly represent the full ASCII character set without
shift characters. It is an extremely secure bar code type that has negligible risk of
misreads.
Enable Plessey
Convert to UK Plessey
If this parameter is enabled, the scanner will
change each occurrence of the character ‘A’ into
character ‘X’ in the code.
Transmit Checksum
If this parameter is enabled, the checksum
characters (two characters) will be transmitted
together with data.
Enable Telepen
AIM Telepen
Support full ASCII code, including all the
alphanumeric and special characters.
Original Telepen
Support only numeric numbers.
UPC-E
UPC-E is a small seven digit UPC bar code type for
number system 0. It allows for a supplemental two or
five digit number to be appended to the main bar code
symbol. The supplemental is simply a small additional
bar code that is added onto the right side of a standard
UPC symbol and consist of either 2 or 5 characters.
Enable UPC-E
This setting enables UPCE as an active bar code
type.
Convert to UPC-A
Converts the UPCE bar code scanned to a UPCA
bar code and follows the characteristics
associated with the UPCA code type.
Figure 19
Figure 18
Summary of Contents for SP5500 OptimusS Series
Page 1: ...METROLOGIC INSTRUMENTS INC SP5500 OptimusS Series User s Guide...
Page 4: ...3...
Page 23: ...1 METROLOGIC INSTRUMENTS INC Optimizer User s Guide...
Page 24: ...2...