Metrologic SP5500 OptimusS Series, User Manual

Page: 43 / 61

21
Application Creation
BAR CODE
The bar code property page includes all the bar code types that are supported by the Optimus.
The developer can enable or disable each type of bar code. In addition, the developer can
configure the parameters of each bar code type to conform to the application requirements. The
many settings under each bar code symbology enable the developer to create application
programs that will enhance all transactional data gathered by the Optimus. The Bar code
properties include:
1. Time out
2. Read Redundancy
3. Code Types
Figure 11
Time out
The Time out setting determines the maximum amount of time the Optimus will engage the
integrated laser scanner. This time-out duration is specified in units of seconds. The default
time-out duration is three seconds.