￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
919 IC Autosampler plus
￭￭￭￭￭￭￭￭
11
3 Installation
3.1
Setting up the instrument
3.1.1
Packaging
The instrument is supplied in protective packaging together with the sepa-
rately packed accessories. Keep this packaging, as only this ensures safe
transportation of the instrument.
3.1.2
Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
3.1.3
Location
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory which is suitable for
operation and free of vibrations and which provides protection against
corrosive atmosphere and contamination by chemicals.
The instrument should be protected against excessive temperature fluctua-
tions and direct sunlight.
3.2
Connecting the instrument to the power grid
WARNING
Electric shock from electrical potential
Risk of injury by touching live components or through moisture on live
parts.
￭
Never open the housing of the instrument while the power cord is
still connected.
￭
Protect live parts (e.g. power supply unit, power cord, connection
sockets) against moisture.
￭
Unplug the power plug immediately if you suspect that moisture has
gotten inside the instrument.
￭
Only personnel who have been issued Metrohm qualifications may
perform service and repair work on electrical and electronic parts.
