2.5 Selection of the mode, key <MODE>
785 DMP Titrino
13
2.5 Selection of the mode, key <MODE>
Press key <MODE> until the desired mode is
displayed and confirm with <ENTER>.
Select the measured quantity pH, U, Ipol, Upol, (T) with
<
←
> or <
→
> and confirm it also with <enter>.
The following modes can be selected:
•
DET: Dynamic Equivalence-point Titration
•
MET: Monotonic Equivalence-point Titration
•
SET: Set Endpoint Titration.
•
CAL: pH Calibration.
•
MEAS: Measuring.
•
TIP: Titration Procedure. Linking of various
commands and methods to a titration procedure.
These standard modes are equipped with a set of
standard parameters. They only need few settings in
order to be ready to work.
TIP is an empty "shell". The TIP sequence has to be
defined with <DEF>, see page 49.
You will find a survey of the modes in the short
Instructions for use, page 10.
MODE
;
–
mode
mode: DET
measured quantity: pH
Summary of Contents for 785 DMP Titrino
Page 135: ......
