NT10G05 USER MANUAL
76-02-105 Rev.B
Page 42 of 80
4.1.7.2 Access Rights
The access rights menu determines what permissions the NMS has. The options
are:
Read only
Get/Get Next requests accepted and values returned, Set
requests ignored.
Read – Write
Both Get and Set requests will be processed.
None
All SNMP requests from this manager will be ignored.
Note, for a unit to respond to SNMP polls, it must be set for at least read only mode.
4.1.7.3 Receives Traps
This menu controls whether traps will be transmitted towards this manager.
Note, the SNMP Dying Gasp trap will be sent to the first configured manager with
traps enabled.
4.1.7.4 SNMP Version
The version control determines the highest level of requests that will be processed.
The options are:
V1
Only process SNMP V1 requests
V2c
Process both V1 and V2c requests
4.1.8 Store Settings
Using the user interface to configure the unit only changes the running configuration
and any changes will be lost unless they are save to start-up config.
Selecting Store Settings and then confirming Y will store the current running config to
start-up which will then be used following a power cycle or warm start.
