Metrodata FM4900, User Manual

Page: 22 / 68

INTRODUCING THE FM4900
76-02-011F 14
The default settings for the terminal connected to the management port are given in the table
below:
Figure 4.10 Terminal port default settings
4 . 6. 3 Connecting to a PC COM port
A converter cable can be supplied to convert from the 25-way female D-type connector on
the rear panel of the DSU to a 9-way D-type connector. This may be required if a PC is being
used as the management terminal to connect to the PC’s 9-pin COM port. The connections
are given in the figure below.
Figure 4.11 Terminal port converter cable 25 way to 9 way
Notes:
To inhibit the modem control function for reasons explained earlier in this section, loop pins
4 and 6 at the 25 way DSU end of cable.
If you are using Windows/Hyperterm as your terminal emulator, click on View/Font and
activate MsLineDraw for optimum picture quality.
Item Default
Terminal type TTY
Baud rate 9600
Parity None
Data bits 8
Stop bits 2
Modem support On
25 Way D
Male (DSU)
Function 9 Way D
Female (PC)
2 Transmit 3
3 Receive 2
4 loop to 6 RTS 7
5 CTS 8
6 loop to 4 DSR 6
7 Ground 5
8 DCD 1
1,9-25 Not Connected 4,9