METRO PROFESSIONAL GDF3004, Instruction Manual

Page: 16 / 193

- 15 -
GB
disconnect the device from
the mains and remove the
power cable from the device.
3. Intended use
• This appliance is intended to fry suitable foods.
• The appliance is intended for commercial use.
Please install GDF3024, GDF3028 and GDF5028
according to fixing method before operation. They
can only be used after proper installation.
• Use the appliance only as described in this
manual.
• Any other use might lead to damage of the
appliance, property or personal injury.
• No liability will be accepted for damage resulting
from improper use or non-compliance with this
manual.
• Keep this instruction manual for future use.
Should this appliance be passed on to a third
party, then this instruction manual must be
included.
4. Before first use
• Remove all packaging materials.
• Make sure you have received all items and they
are in good working condition. In case of damage
or incomplete delivery please contact your dealer
( Guarantee).
• Please keep all original packaging for long-term
storage of the appliance.
• Clean the appliance ( Cleaning and storage).
• Always operate the appliance on a level, stable,
clean, heat resistant and dry surface that is away
from splashing water and counter-top’s edge.
• Ensure that a suitable plug socket is easily
accessible to the appliance.
5. Installation and operation
For model GDF3024, GDF3028 and GDF5028,
the operation for both deep fryers of each model
is identical. They can be used separately or
in combination. Temperature level can be set
independently for each fryer.
34. Never operate the device if
there is no frying oil in the oil
container. Make sure that the
oil level is always between the
MIN and MAX markings.
WARNINGS! Danger of
burns!
− During operation some
of the parts of the device
become very hot. In
order to avoid injuries, be
careful when you touch
these surfaces.
− If the oil level is above the
MAX marking, hot oil may
overflow.
− During operation the deep
fat fryer and the oil in the
oil container get very hot
and there is a danger that
the oil may ignite.
35. Only use liquid fat for frying.
Let blocks of fat melt first!
36. Do not leave the device on for
too long!
37. Set the temperature switch
to the (off) position and
disconnect the device from
the power point (pull the plug
out!), as soon as you have
finished frying and the device
is no longer used.
38. To ensure that misuse and
associated hazards are
ruled out, make your waste
electrical device unusable
before disposal. To do so,