Pocket Conductivity Tester
2
Prior to Use
•
Remove the electrode protective cap from the tester.
•
Soak the electrode for a few minutes in tap water to remove dirt and oil stains on the electrode.
Switching the Tester On and Off
•
Press the
Meas
key to switch on the tester, the display shows measured value.
•
Press and hold the
Meas
key for 5 seconds, the tester will switch off.
•
If you do not press any key for 8 minutes, the tester will automatically switch off to conserve energy.
Power
On
5 sec.
Power
Off