TeraOhm 5kV
24
Legend of displayed symbols:
STEP VOLTAGE
Name of selected function
Off (Fil1, Fil2, Fil3)
Filter type enabled, see the chapter 5.3.
Configuration
1500V
Set test voltage – step 250 V
U=1593V
Actual test voltage – measured value
I=0.00nA
Actual test current – measured value
>1.50T
Ω
Ω
Ω
Ω
Insulation Resistance –
result
C=0.6nF
Capacitance of measured object
tm:05min 15s
Actual test duration
R 300V=>300G
Ω
Last result of 1
st
step
R 600V=>600G
Ω
Last result of 2
nd
step
R 900V=>900G
Ω
Last result of 3
rd
step
R1200V=>1.2TG
Ω
Last result of 4
th
step
R1500V=>1.5T
Ω
Last result of 5
th
step
U1= 343V
1
st
step voltage
U2= 655V
2
nd
step voltage
U3= 948V
3
rd
step voltage
U4=1284V
4
th
step voltage
U5=1593V
5
th
step voltage
Notes:
-
Timer information is displayed from the start of the measurement until the completion
of each step measurement.
-
Timer information shows the complete measurement period after the completion of
the measurement.
-
A high-voltage warning symbol appears on the display during the measurement to
warn the operator of a possible dangerous test voltage.
-
The value of capacitance is measured during the final discharge of measured object.
Set-up parameters
for Step Voltage test:
-
Press the
SELECT
key, Set-up menu appears on
display, see the figure 16.
-
Select parameter (line) to be set using the
↑↑↑↑
and
↓↓↓↓
keys;
-
Adjust set parameter using the
←
←
←
←
and
→
→
→
→
keys.
-
Complete the set-up adjustments by pressing either
the
ESC
key or
START
key (to run the measurement
directly) or changing the rotary switch position. Last
displayed settings are stored.
Fig. 16.
Set-up menu in Step
Voltage Test
Legend of displayed symbols:
STEP VOLTAGE
Name of selected function
SETTING PARAMETERS:
Unominal
1000V
Set test voltage – step 250 V
Step Time
01min
Duration of measurement per step
