TeraOhm 5kV
18
5.4. Voltage measurement
Selecting this function displays the following states (initial state and state with results
after completion of the measurement).
Initial display
Display with results
Fig. 8.
Voltage function display states
Measurement procedure:
-
Connect the test leads to the instrument and to the measured source.
-
Press the
START
key to start the measurement, continuous measurement starts to
run.
-
Press the
START
key again to stop the measurement.
-
The result (see the right figure above) can optionally be saved by pressing the
MEM
key twice, see the chapter 6.1. Store, Recall and Clear Operation.
•
Warning!
•
Refer to Warnings chapter for safety precautions!
5.5. Insulation Resistance measurement
Selecting this function displays the following states (initial state and state with results
after
the completion of the measurement).
Initial display
Display with results
Fig. 9.
Insulation Resistance function display states
