MI 3121 Smartec Insulation / Continuity
Standards applied
10
2.3 Standards applied
The MI 3121 Smartec Insulation / Continuity instrument is manufactured and tested
according to the following regulations, listed below.
Electromagnetic compatibility (EMC)
EN 61326
Electrical equipment for measurement, control and laboratory use –
EMC requirements
Class B (Hand held equipment used in controlled EM environments)
Safety (LVD)
EN 61010 - 1
Safety requirements for electrical equipment for measurement, control,
and laboratory use – Part 1: General requirements
EN 61010 - 031
Safety requirements for hand-held probe assemblies for electrical
measurement and test
Functionality
EN 61557
Electrical safety in low voltage distribution systems up to 1000 V a.c. and
1500 V d.c. - Equipment for testing, measuring or monitoring of
protective measures
Part 1
General requirements
Part 2
Insulation resistance
Part 4
Resistance of earth connection and equipotential bonding
Part 10
Combined measuring equipment
Note about EN and IEC standards:
Text of this manual contains references to European standards. All standards of EN 6xxxx
(e.g. EN 61010) series are equivalent to IEC standards with the same number (e.g. IEC
61010) and differ only in amended parts required by European harmonization procedure.
