MI 3121 Smartec Insulation / Continuity
Clearing stored data
33
6.6 Communication
Stored results can be transferred to a PC. A special communication program on the PC
automatically identifies the instrument and enables data transfer between the instrument
and the PC.
There are two communication interfaces available on the instrument: USB or RS 232.
The instrument automatically selects the communication mode according to detected
interface. USB interface has priority.
Figure 6.9: Interface connection for data transfer over PC COM port
How to transfer stored data:
RS 232 communication: connect a PC COM port to the instrument PS/2 connector
using the PS/2 - RS232 serial communication cable;
USB communication: connect a PC USB port to the instrument USB connector
using the USB interface cable.
Switch
on
the PC and the instrument.
Run
the
Eurolink
program
.
The PC and the instrument will automatically recognize each other.
The instrument is prepared to download data to the PC.
The program
Eurolink
is a PC software running on Windows 95/98, Windows NT, Windows
2000, Windows XP, Windows Vista. Read the file README.TXT on CD for instructions
about installing and running the program.
Note
:
USB drivers should be installed on PC before using the USB interface. Refer to
USB installation instructions available on installation CD.
