MI 3109 EurotestPV Lite
Instrument operation
30
Figure 4.21: Searching and selection of Metrel Powermeter Bluetooth connection
Keys:
UP / DOWN
Selects appropriate Bluetooth device.
TEST
Confirms selected device.
ESC
Exits back to Bluetooth devices menu.
Function selector
Exits back to main menu without changes.
Note:
This operation must be performed when working with the Powermeter for the first
time or if its settings were changed.
4.4.9.3 Initialization of the Bluetooth dongle(s)
The Bluetooth dongle(s) A 1436 should be
initialized when they are used for the first
time. During initialization the instrument sets
the dongle parameters and name in order to
communicate properly.
Figure 4.22: Menu for initialization of
Bluetooth dongle(s)
INIT. BT DONGLES
EurotestPV Lite
Initializes Bluetooth dongle for EurotestPV
Lite instrument.
PowerQ series
Initializes Bluetooth dongle for Metrel
Powermeter.
Keys:
UP / DOWN
Selects option.
TEST
Starts initialization of Bluetooth dongle.
ESC
Exits back to Communication menu.
Function selector
Exits back to main menu without changes.
Initialization procedure (Bluetooth dongle for the EurotestPV Lite instrument):
1. Connect
Bluetooth dongle A 1436 to the instrument’s PS/2 port.
2. Switch on the instrument.
3. Press a RESET key on the Bluetooth dongle A 1436 for
at least 10 seconds.
4.
EurotestPV Lite
should be selected in INIT. BT DONGLES menu. Press the TEST
key.
5. Wait for confirmation message and beep. Following message is displayed if dongle
was initialized properly:
EXTERNAL BT DONGLE SEARCHING OK!
