MI 3110 EurotestIM
Data handling
45
6.5.4 Renaming installation structure elements (upload from PC)
Default installation structure elements are “Object”, “Block” and “Fuse”.
In the PCSW package EUROLink PRO default names can be changed with customized
names that corresponds the installation under test. Refer to PCSW Eurolink-PRO
HELP for information how to upload customized installation names to the instrument.
Figure 6.12: Example of menu with customized installation structure names
6.6 Communication
Stored results can be transferred to a PC. A special communication program on the PC
automatically identifies the instrument and enables data transfer between the instrument
and the PC.
There are two communication interfaces available on the instrument: USB or RS 232.
The instrument automatically selects the communication mode according to detected
interface. USB interface has priority.
Figure 6.13: Interface connection for data transfer over PC COM port
How to transfer stored data:
❑
RS-232 communication: connect a PC COM port to the instrument PS/2
connector using the PS/2 - RS232 serial communication cable;
❑
USB communication: connect a PC USB port to the instrument USB connector
using the USB interface cable.
❑
Switch
on
the PC and the instrument.
❑
Run
the
Eurolink-PRO
program
.
❑
The PC and the instrument will automatically recognize each other.
❑
The instrument is prepared to download data to the PC.
