MI 3125 InstaltestCOMBO
Settings
21
4.2.2 Initial settings
In this menu the instrument settings and
measurement parameters and limits can be
set to initial (factory) values.
Figure 4.3: Initial settings dialogue
Keys:
TEST
Restores default settings.
Function selectors
Exits back to main function menu without changes.
Warning:
Customized settings will be lost when this option is used!
If the batteries are removed for more than 1 minute the custom made settings will
be lost.
The default setup is listed below:
Instrument setting
Default value
Contrast
As defined and stored by adjustment procedure
Isc factor
1.00
RCD standards
EN 61008 / EN 61009
Language English
Function
Sub-function
Parameters / limit value
R ISO
No limit
Utest = 500 V
Low Ohm Resistance
R LOW
Ω
No limit
SOCKET No
limit
Z - LINE
Fuse type: none selected
Z - LOOP
Fuse type: none selected
Zs
rcd
Fuse type: none selected
RCD RCD
t
Nominal differential current: I
Δ
N
=30 mA
RCD type: G
Test current starting polarity:
(0
°
)
Limit contact voltage: 50 V
Current multiplier:
×
1
Note
:
Initial settings (reset of the instrument) can be recalled also if the TAB key is
pressed while the instrument is switched on.
