METREL 3-phase AktivGT/Machine adapter Plus A 1322, Instruction Manual

Page: 12 / 44

A 1322 / A 1422 Operation
12
4.3 Working with the adapter
Master instrument must be set in a special operating mode to support operation with A
1322 / A 1422. Following steps on the master PAT instrument are to be performed to
enable/disable working with A 1322 / A 1422.
Step no. Description
1 Press and hold the
ESC
key on alpha-numeric keyboard and
switch on the
master instrument.
2 Enter password
A1322
for A 1322 or
A1422
for A 1422 and press the
ENTER
key for confirmation.
3 In SET A 1322 (SET A 1422) menu select
A 1322 ON (SET A 1422 ON
)
option to enable the support for A 1322 (or A 1422) on master instrument.
Press the
ENTER
key for confirmation.
4 Power ON the 3-phase adapter and connect it to the master instrument by
using RS 232 communication cable.
5 Transfer 3-phase adapter’s data to the master instrument by pressing
“
3Ph>Dat
” (F2) key on the
Instrument data
menu of the master instrument.
See user manual of the master instrument for details.
Master instrument is now set and can be used with A 1322 (or A 1422) 3-
phase adapter.
Notes
:
 To
disable
the support for A 1322 / A 1422 on master instrument, use
A 1322
OFF (A 1422 OFF)
option.
For using the A 1322 / A 1422, the following procedure shall be applied:
Item Comment

Connect A 1322 / A 1422 and the master
instrument via RS232 interface. See
chapter 4.1 Connections

Connect the master test socket and the A 1322
/ A 1422 PAT test socket. See
chapter 4.1 Connections

Connect the master instrument mains cord to
the output power supply socket on A 1322 / A
1422. See
chapter 4.1 Connections

Connect A 1322 / A 1422 to mains supply.

Turn on fuse/circuit breaker on A 1322 / A
1422. The adapter beeps.

Turn on the master instrument.

Select the test function. See user manual of the master
instrument.

Measuring system is now ready for testing.
3PH
appears on the upper left
corner of the master
instrument screen for
indication of connected A 1322
/ A 1422.

Connect tested equipment to the proper test
socket/plug See
Chapter 5 Measurements
/ Chapter 6 Measurements
according to IEC EN 60974-4