8
From the configurations page you should first test
your system to make sure everything is connected
properly after the DSP. To test your setup select the
IDENTIFY button. This will play a chime thought
your setup to confirm your system is ready to pass
audio. (Figure 1)
Next select your VEHICLE TYPE (Figure 1)
The MPS-DSPL-BT interface will be using the
Bluetooth circuit board as the source select General
under the “Select Vehicle Type and OE Amp
Options” menu. Keep “Without OE Amp” selected.
Then select Apply. (Figure 2)
(Figure 1)
(Figure 2)
QUICK SETUP GUIDE
(CONT.)
DSP Setup & Controls (Cont’d)
Continued on the next page
