13
REV. 9/24/2020 INSTMPS-DPSL-BT
ADVANCED DSP FEATURES & CONTROL OPTIONS
Configuration
(Figure 7)
Continued on the next page
(Figure 7)
•
Identify
- Click this button to confirm that the interface is connected
properly. If so, a chime will be heard from the front left speaker*.
* Only installations where the interface is connected to a front left speaker.
•
Reset to Defaults
- Resets the interface to factory settings. During the reset
process the amplifiers will shut off for 5-10 seconds.
•
Vehicle Type
- Select the vehicle type from the drop down box, select either
Without OE Amplifier or With OE Amplifier, then click the apply button.
•
Lock Down
- Click this button to save the selected settings. Attention! This
button must be selected before closing the app or cycling the key otherwise
all settings will be lost.
•
Save Configuration
- Saves the current configuration to the mobile device.
•
Recall Configuration
- Recalls a configuration from the mobile device.
•
About
- Displays information about the app, vehicle, interface,
and mobile device.
•
Set Password
- Assign a 4-digit password to lock the interface. If no
password is desired, use “0000”. This will clear out any currently set
password. It is not necessary to lock down the interface when setting a
password. Note: A 4-digit only password must be chosen otherwise the
interface will show “password not valid for this device”.
•
Clear Phones
- Clears phones paired from memory.
