11
REV. 9/24/2020 INSTMPS-DPSL-BT
QUICK SETUP GUIDE
(CONT.)
DSP Setup & Controls (Cont’d)
(Figure 5)
DSP Setup & Controls (Cont’d)
The Equalizer Adjustment tab will allow you to independently set your preferred audio
curve for each channel. It is recommended that a Real Time Analyzer (RTA) be used to
adjust these settings. If you choose to leave your EQ settings flat is will not affect the
output signal. The purpose of the EQ setting is to offer the user the ability to tune the
system to their listening style. (Figure 5)
• The front, rear, and sub channels can be adjusted independently within this tab with
15 bands of equalization available.
• The Gain slider on the far left is for the channel selected.
Continued on the next page
