Page 17
Locker Controller ELS ASSIGN Touch Technical Manual
Internal Emergency open pushbutton
STEP 1:
Press the Emergency open pushbutton. All
lockers connected to the Locker Controller start to
unlock and open one after another.
External Emergency open pushbutton
STEP 1:
Turn the key on emergency open pushbutton
clockwise to initiate emergency opening of all Lockers.
All lockers connected to the Locker Controller start to
unlock and open one after another.
Device replacement
This chapter describes Locker Controller replacement procedure. The problem should be identified
before any repairing is tried.
STEP 1:
Disconnect the power supply.
NOTE
Disconnect the adapter not the wires fixed on the Locker Controller board to avoid short circuit.
STEP 2:
Open the Locker Controller Box/Locker (see Locker manufacturer's documentation).
STEP 3:
Disconnect all cables and
mark their exact position.
STEP 4:
On the new Locker Controller set the same network address.
STEP 5:
Replace the Locker Controller with a new one.
STEP 6:
Reconnect all cables
exactly the same as they were connected previously
.
STEP 7:
Connect the power supply.
