background image

5

6

"A"

"B"

"B"

"A"

Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Unclip 
the climate control trim panel and remove (2) 
screws exposed.  Remove (2) screws above 
the radio opening.  Unclip the dash trim 
bezel, disconnect the wiring and remove the 
bezel.  Remove (4) screws securing the 
factory head unit and disconnect the wiring.

1

TOYOTA Cressida  1985-87

2

Slide 

Mounting Tabs #3

 into slots 

"C" 

on 

Bracket Set #1.  

The Mounting Tabs, 

Brackets and Bracket slots can be identified 
by the stamped letter on each component.  

Skip to the Installation Instructions for ALL 
VEHICLES on Page #10.

Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Remove 
(4) Phillips screws securing the factory head 
unit and disconnect the wiring.

1

TOYOTA Landcruiser  1982-87

2

Slide 

Mounting Tabs #3 

and 

#8

 into slots 

"B" 

on 

Bracket Set #12.  

The Mounting 

Tabs, Brackets and Bracket slots can be 
identified by the stamped letter on each 
component.  

Skip to the Installation 

Instructions for ALL VEHICLES on Page 
#10.

Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Remove 
(3) screws from the lower edge of the climate 
control panel.  Remove (8) screws from the 
perimeter of the dash trim bezel.  Pull out on 
the lower edge of the bezel and remove.  
Remove the screws securing the factory 
head unit and disconnect the wiring.

1

TOYOTA Landcruiser  1988-92

2

Slide 

Mounting Tabs #3

 into slots 

"H" 

on 

Bracket Set #1.  

The Mounting Tabs, 

Brackets and Bracket slots can be identified 
by the stamped letter on each component.  

Skip to the Installation Instructions for ALL 
VEHICLES on Page #10.

Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Remove 
(4) screws from the top edge of the dash trim 
bezel.  Remove (2) screws below the radio 
opening.  Remove (1) screw from the lower-
left tab of the dash trim bezel (to the right of 
the a/c vent).  Unclip the bezel.   Remove the 
screws securing the factory head unit and 
disconnect the wiring.

1

TOYOTA Corolla (sed/wag-upper dash)  1988-93

2

Slide 

Mounting Tabs #8

 into slots 

"A" 

on 

Bracket Set #12.  

The Mounting Tabs, 

Brackets and Bracket slots can be identified 
by the stamped letter on each component.  

Skip to the Installation Instructions for ALL 
VEHICLES on Page #10.

"C"

"C"

"H"

"H"

Reviews: