Metra Electronics 95-7801, Installation Instructions Manual

Page: 11 / 16

9
95-7801 KIT PREPARATION
CRV:
DOUBLE DIN HEAD UNITS: Slide the head unit into the factory bracket assembly. Align
the holes in the brackets with the holes in the head unit and secure with the screws included with
the unit. Cut and remove the dividing rib from the
Radio Housing and snap the Housing into the
opening (Fig. A).
Skip to step #4 on Page 11.
ISO STACK HEAD UNITS: Slide the aftermarket head unit (and digital sound processor, equaliz-
er, etc.) into the
ISO Brackets
and mount the lower unit to the Brackets with the screws includ-
ed with the unit. Slide the units into the factory bracket assembly. Align the holes in the brackets
with the holes in the upper unit and secure with the screws included with the unit. Snap the Radio
Housing into the radio opening (Fig. B).
Skip to step #4 on Page 11.
PRELUDE 1997-01: DOUBLE DIN HEAD UNITS: Slide the head unit into the factory bracket
assembly. Align the holes in the brackets with the holes in the head unit and secure with the
screws included with the unit. Cut and remove the dividing rib from the
Radio Housing and snap
the Housing into the opening (Fig. C).
Skip to step #4 on Page 11
. ISO STACK HEAD UNITS:
Slide the aftermarket head unit (and digital sound processor, equalizer, etc.) into the factory
bracket assembly. Align the holes in the brackets with the holes in the units and secure with the
screws included with the units. Snap the
Radio Housing
into the radio opening (Fig. D).
Skip to
step #4 on Page 11. CIVIC 1999-00: DOUBLE DIN HEAD UNITS: Slide the head unit into the
factory bracket assembly. Align the holes in the brackets with the holes in the head unit and
secure with the screws included with the unit.Cut and remove the dividing rib from the
Radio
Housing
and snap the Housing into the opening (Fig. E).
Skip to step #4 on Page 11.
ISO
STACK HEAD UNITS: Slide the aftermarket head unit (and digital sound processor, equalizer,
etc.) into the factory bracket assembly. Align the holes in the brackets with the holes in the units
and secure with the screws included with the units. Snap the
Radio Housing
into the radio open-
ing (Fig. F). Skip to step #4 on Page 11.
CRV: DOUBLE DIN HEAD UNITS:
Slide the head unit into the factory bracket assembly. Align the holes in the
brackets with the holes in the head unit and secure with the screws included with the unit. Cut and remove the
dividing rib from the
Radio Housing
and snap the Housing into the opening
(Fig. A).Skip to step #4 on Page 11.
ISO STACK HEAD UNITS:
Slide the aftermarket head unit (and digital sound processor, equalizer, etc.) into the
ISO
Brackets
and mount the lower unit to the Brackets with the screws included with the unit. Slide the units into the
factory bracket assembly. Align the holes in the brackets with the holes in the upper unit and secure with the screws
included with the unit. Snap the Radio Housing into the radio opening
(Fig. B). Skip to step #4 on Page 11.
PRELUDE 1997-01: DOUBLE DIN HEAD UNITS:
Slide the head unit into the factory bracket assembly. Align the
holes in the brackets with the holes in the head unit and secure with the screws included with the unit. Cut and
remove the dividing rib from the
Radio Housing
and snap the Housing into the opening
(Fig. C).Skip to step #4 on
Page 11. ISO STACK HEAD UNITS:
Slide the aftermarket head unit (and digital sound processor, equalizer, etc.)
into the factory bracket assembly. Align the holes in the brackets with the holes in the units and secure with the
screws included with the units. Snap the Radio Housing into the radio opening
(Fig. D). Skip to step #4 on Page 11.
CIVIC 1999-00: DOUBLE DIN HEAD UNITS:
Slide the head unit into the factory bracket assembly. Align the holes
in the brackets with the holes in the head unit and secure with the screws included with the unit. Cut and remove the
dividing rib from the
Radio Housing
and snap the Housing into the opening
(Fig. E). Skip to step #4 on Page 11.
ISO STACK HEAD UNITS:
Slide the aftermarket head unit (and digital sound processor, equalizer, etc.) into the
factory bracket assembly. Align the holes in the brackets with the holes in the units and secure with the screws
included with the units. Snap the Radio Housing into the radio opening
(Fig. F). Skip to step #4 on Page 11.
3