Metos MONDIAL 300, Installation And Operation Manual, Page: 12 / 19

26.7.2004 Rev. 2.0
Operation instructions
6
4.3.3 Sharpening
Sharpen the blade only after cleaning it.
Switch off the machine and turn the regulator knob placing it on thickness 18. Fit the
sharpener to the regulator plate by inserting its pin in the corresponding hole and fix it by
screwing the knob.
Place the regulator knob on thickness 14 and drive the breaker to start sharpening for
about 30 seconds. Finish by placing the regulator knob on thickness 22 for about 2 sec-
onds.
Switch off the machine and place the regulator knob back on thickness 18 and take off the
sharpener. Place the regulator knob on thickness 0 and clean thoroughly the blade and the
machine.