Metos MONDIAL 300, Installation And Operation Manual, Page: 10 / 19

26.7.2004 Rev. 2.0
Operation instructions
4
4. Operation instructions
4.1 Before using the appliance
Before product loading onto or unloading from the product holder (1:D), check that slice
thickness control (1:B) is on “zero”position and that blade (1:L) is at a standstill.
4.2 Operation procedures
Bring the product holder (1:D) at starting position, towards operator; lift the food-pusher
(1:G) and put the product to be cut on the product holder (1:D), in contact with the gauge
plate (1:F), hold product with food-pusher (1:G), turn slice thikness control (1:B) to obtain
the required thickness; turn the switch (1:A) ON to start the blade(1:L); by seizing the
food-pusher handle (1:R) with the right hand make the product holder (1:D) slide by al-
ternating movements and carry out cutting.
Pick up slices at their exit area.
When cutting is finished, switch the machine OFF by operating the switch (1:A) and place
the slice thickness control (1:B) to “zero”position.
Machine Parts
A ON/OFF switch
B Slice thickness control
C Blade cover knob
D Product holder
E Product holder support knob
F Gauge plate