Metos Econo BD-600W, Installation And Operation Manual

Page: 4 / 12

28.09.2012
3
Freezer Metos Econo BD-600W
1.4 Unpacking
Unpack the appliance and check for visible damages.
Packing materials (plastic bags, polystyrene foam, nails, etc.) should be kept out of
children’s reach as they are potential sources of hazard, and they should be properly re-
cycled in compliance with local regulations in force.
Check that the serial number corresponds to the transport documents.
1.5 Disposal of the appliance
When the appliance has reached the end of its service life, it must be recycled in accord-
ance with current regulations. Contact a company which specialises in recycling. The best
method to ensure that no one will remain trapped inside is to take off the door completely.
The appliance must not be disposed of together with household waste and metal scrap. Spe-
cially avoid damaging the refrigeration circuit, particularly near the heat exchanger.
2.
Installa
tion
Before making the connection to the mains, ensure that the voltage and frequency are as
indicated on the appliance nameplate.
The installation of this appliance must be carried out in accordance with the manufacturer’s
instructions and following local regulations.
Never use sockets or plugs without earth connection. The mains socket must be earthed.
The manufacturer declines all responsibility if the appliance has not been installed and
connected according to the instructions given in this manual.
The use of adapters, mutli-pugs and/or extension leads is strictly prohibited.
2.1 Positioning
The machine has not been designed to be installed in explosive environments.
Check that the fl oor is able to support the weight of the appliance and that it is level.
Control that the appliance is perfectly level. Regulate the adjustable feet if necessary. Use
a level,if needed. The maximum permissible deviation from the horizontal plane is +/-0.5
degrees.
All four feet should rest on the fl oor. This will ensure proper door operation.
To ensure proper air fl ow and avoid any damage to the refrigeration circuit, allow a mini-
mum side clearance of 80 mm and 800 mm on the upper side.
Do not place the appliance close to heat sources (such as ovens, radiators, etc.) or exposed
to direct sunlight and provide suitable insulation from walls or
fl oor if they transmit heat.
Do not install the appliance in places where the temperature drops below +15°C. For indoo-
ruse only.