24.08.2015
METOS ICE DISPENSER CD40AS
4
3. STARTING UP
The following operations shold be carried out before the ice-maker is started up:
To ensure that the water flows smoothley from the machine, the tubes should be
inclined at a minimum of 3%, and must not be bent or costricted in any way. The tubes
should ideally discharge the water into an open drain-trap.
Before making the electrical connections, make sure that the supply voltage
corresponds to that indicated on the registration plate located on the back panel of the
machine.
The maximum permitted tolerance for voltage variation is +/- 10% of the rated
value. The electrila isolator switch must be fitted with correct fuse rating.
4.
TOIMINTA
Turn the main switch to ON. The machine will start up in the water filling stage which
lasts 5 mins.
The technician/installer will carry out a full inspection of the machine interior.
The first batch of the ice cubes produced is loaded into a container after about 30 min.
ATTENTION
If the temperature of the room in which the machine is installed is below +15°C,
then the freezing cycle will be shorter (17-20 min.)
If, on the other hand, the temperature of the room e30°C, then the
freezing cycle will be longer (25-30 min).
STOP
STOP