24.08.2015
METOS ICE DISPENSER CD40AS
3
2. INSTALLATION
The following operations should be carried out before the ice maker is started:
• Check hat the machine has not been damaged in any way during transporta-
tion.
• Install the ice-maker in the intended position, making sure that it is perfectly
level.
• Make the water mains connections before connecting the electrical supply.
• Connect the 3/4” feed tube supplied to the machine and to the cold drinking
water feed line.
• It is both practical and advisable for safety reasons to fit a water shut off valve,
which is not supplied with the machine.
• Attach a plastic hose with an internal diameter of 20mm and of suitable length
(not more than one metre from the machine) to the drainage coupling on the
machine, leading to the trap.
N.B.
When choosing where to install the machine, it is important to en-
sure that:
a) the room temperature doeas not drop below +5° and does
not 43°C
b) the temperature of the water does not drop below +10°C and
does not 30°C
c) the water feed pressure does not drop below 1 bar and does
not exceed 5 ba. If the pressure exceeds 5 bar, fit a pressure
reducer on the water supply unit serving the machine
d) the machine is well away from any sources of heat and in-
stalled in well-ventilated surroundings
- Make sure that the machine is installed in a position where the
ventilation of the cooling unit cannot be obstructed (only air-cooled
machine).
- Do not install the machine in dusty surroundings as the condenser
in the cooling unit will become clogged very quickly (only air-cooled
machines).
STOP
