17.3.2005
Rev. 2.0
Adjustment instructions
21
Bowl height (X): AE40 = 162 mm
The upper and lower position of the bowl is determined by microswitch (1) and (2),
(Fig.6). The two mechanical stops consisting of the bolts (3) and (4) are adjusted so that
they will be hit approx. 2 mm after the microswitch, in case the microswitch should
fail.The upper position of the bowl arms is adjusted by moving the microswitch (1) in its
slots, it is of utmost importance that the stop screw (3) is readjusted afterwards. In the
same way the lower position is adjusted by moving the microswitch (2) in its slots. there-
after the mechanical stop (4) is adjusted.
)LJ
)LJ
