Metos 92/04 TVTC, User Manual

Page: 28 / 48

24.10.2007 Rev. 1.1
Installation
22
Fig. 9
1. Terminal block
2. Cable clamp
3. Side panel fixing screws
4. Side panel
The terminal block is mounted on the lower compartment as shown in Fig.9.
The power cable must be secured with the cable clamp fitted to the appliance (pos.2 in
Fig. 9) to prevent it from being damaged.
The earth cable must be long enough to withstand any potential mechanical strain after
the live wires.
If this proves difficult, loosen the lower and rear fixing screws (pos. 3 in Fig.9) to take the
right side panel off the appliance too (pos. 4 in Fig. 9).