Metos 92/04 TVTC, User Manual

Page: 16 / 48

24.10.2007 Rev. 1.1
Operating instructions
10
4.2 Using the appliance
4.2.1 Switching on the cooking top
Vetroceramica
Turning the knob (pos. 1 in Fig. 2) to the desired position switches on the power indicator
light (pos. 2 in Fig. 2) . This means that the appliance is on and the selected cooking zone
is beginning to heat up. This type of heating takes place when the heating elements are
enabled and heat spreads through radiation.The heating elements temperature can be ad-
justed through a power regulator.
Fig. 3
1. OFF position
2. Minimum temperature
3. Maximum temperature
4. Switching on the second heating element
By turning the knob further, for a few seconds, until it reaches (pos. 4 in Fig. 3), the se-
lected zone reaches maximum heat thanks to the second heating element switching on.
To bring the appliance back to its normal operating status -with only one heating element
switched on-, turn the knob to the 0 position; if additional heat is needed, select the desired
temperature.