Metos 72/02CG, Installation And Operation Manual

Page: 42 / 72

2.9.2003 Rev. 1.0
Adjustment instructions
36
6.5 Adjusting minimum output
If the appliance will be using liquid gases, remove the knobs, insert a screwdriver through
the hole and completely screw down the screw shown as item 86 in Fig. 17.
Fig. 17
86. Screw to adjust minimum output
87. Gas inlet pipe fitting
88. Thermocouple pipe fitting
89. Gas outlet pipe fitting
90. Pilot burner pipe fitting
For other types of gas, you will need to adjust the screw as required until you obtain a sta-
ble and even flame. Proceed as follows:
• unscrew the screw shown as item 91 in Fig. 18;
Fig. 18
91. Screw