METER VARIOS, Manual, Page: 36 / 60

32
OPERATION
The measurement tabular information at the top of the Measurement tab ( Figure 36 )
provides an overview of a wide range of information which are listed in Table 7 .
Figure 37 SoilView Manager tab
Table 4 Manager Tab in LABROS SoilView Software
First Row–Heading Second Row–Data
Status
Possible status options:
Configuration
Running
Finished
Sample Name
User-defined sample name is shown.
Type of Sample Ring
The type of sample ring (250 mL or customized) selected during
configuration.
Filename
Name user gives to the data file; should include the folder structure.
By selecting the ellipsis button, a measurement can be continued
( Section 2.7.6 ).
Device VARIOS_PRO-[000]
The name of the VARIOS device used.
Measurement Profile Measurement profile used ( Section 2.7.4.1 ).
Mode
Measurement Interval
Measure Parameter
continuous, point by point, or verification ( Section 2.7.4.2 ).
Time between consecutive conductivity measurements ( Section 2.3.1 ).
Duration of an active conductivity measurement ( Section 2.3.1 ).
[empty]
By clicking on the ellipsis button, switch directly into the settings
menu and the selected profile.
Balance
The HYPROP Balance used.
Empty soil sample
ring weight [g]
If the soil sample ring weight was already defined during measurement
configuration, the value is listed here.
O-ring (3x) weight [g] The weight of the retaining rings used to fix the sensor needle can
be entered here or later for evaluation.