Meteor Matisse, User Manual

Page: 40 / 49

34
Windows Driver and Met Label Software
The printer driver supports Win 7/Vista/2003/XP/2000/NT/ME/98/95
operating systems. Each Matisse printer comes with powerful bar code
label design software Met Label and operating instructions. Both the
Windows driver and Met Label are available on the Printer Accessory CD,
also available for download from: www. meteorbarcode.it .
Note: If you need to update the driver, please remove any old versions
of the driver before continuing.
DIP Bit Functions Remarks
1
ON: Direct thermal print
OFF: Thermal transfer print
Printing type settings
Default: OFF
2
ON: Tear off position
OFF: Edge of next label
Stop position setting
Default: OFF
3
ON: Cutter is installed
OFF: Cutter is not installed
Cutter settings
Default: OFF
4
ON: Peeler is installed
OFF: Peeler is not installed
Peeler settings
Default: OFF
5
ON: Transmissive Sensor
OFF: Reflective Sensor
Select Media Sensor
Default: OFF
6
ON: Enable IP setting
OFF: Disable IP setting
IP address setup
Default: OFF
7
8 | 7
0 | 0 – 9600,n,8,1
0 | 1 – 19200,n,8,1
1 | 0 – 38400,n,8,1
1 | 1 – 57600,n,8,1
RS232 Serial Port
baud rate setting
0: OFF, 1: ON
Default: 00
8