Meteor Communications Corporation MCC-545C, Operation And Maintenance, Page: 76 / 88

OPERATIONS 4-40
MCC-545C PACKET DATA RADIO
12/2000
MCC-545C COMMANDS
COMMAND DESCRIPTION PARAMETERS RANGE
†RCT {,action} Display/set remote control terminal functionality. This
functionality is applicable to Packet protocol systems
only and controls whether the unit ignores intercepted
data reports. If enabled, intercepted reports are ignored. action =
ON – enable
OFF – disable
RED
Without parameters, generates report of current RED
setup.
†RED,ID ,nn-nnn Enables reception of remote emergency indications from
an MCC Remote Emergency Device (RED). The entered
ID code is used with RED messages generated by the
MCC-545C using
RED,TEST or RED,TX .
nn = call sign
prefix
nnn = call sign
suffix
0 – 99
0 – 999
†RED,NUM ,n Set dead-band interval in which repeated RED
activations do not generate another alert message. n = dead-band
interval in
seconds
1 – 120
†RED,OFF
Disable reception of remote emergency indications from
an MCC Remote Emergency Device (RED).
RED,TEST
Simulate a RED test message. Unlike a true RED test
button depression, this message is also echoed to the
local MNT and DTA ports.
RED,TX
Simulate a RED alert message. Unlike a true RED alert
button depression, this message is also echoed to the
local MNT and DTA ports.