Thermal Imaging Camera
Installation Guide
LWIR
5- 2
5.1.1 Network Adapter Settings
To communicate with the LWIR thermal imaging camera, you need to specify
the correct Network Adapter Settings on your computer/device.
The instructions below apply to Windows 10 systems. If you have a
different operating system, refer to the user guide/help files for your
system.
1) In your computer’s
Type here to search
box (bottom left of screen), type
Network Connections
.
The Network Connections window displays details of each network to
which your computer is connected.
2) Right-click on the Network containing your LWIR thermal imaging camera
and select the
Properties
option.
3) Select the
Internet Protocol
option and click on
Properties
.
4) Select the
Use the following IP address
option and enter the values:
IP address:
10 . 1 . 10 . 150**
Subnet mask:
255 . 255 . 0 . 0
**
the default IP address for the LWIR thermal imaging camera is
10.1.10.102. For your computer, you can select any IP address from
10.1.10.1 to 10.1.10.255
apart from 10.1.10.102
.
5) Click on
OK
to save these settings.
Your computer/device is now on the same network as the LWIR thermal
imaging camera.
5.1.2 Opening the Web Server interface
1) Make sure the computer/device is connected to your LWIR’s network and
that all system components are connected and operating correctly.
2) Open a web browser.
3) In the web browser address bar, type
10.1.10.102
The LWIR Web Server interface opens in your browser window.
Refer to Sections 5.2 to 5.10 for full details of the LWIR Web Server
interface.
Summary of Contents for LAND LWIR
Page 47: ......
