613-678-3957
METEC Metal Technology Inc.
17
MAINTENANCE
Help your new Snow Blower keep its value! Use only genuine parts.
1.
Grease all grease fittings following each shift, ensuring that all fittings accept grease.
Replace any fittings that do not accept grease. Insufficient lubrication will result in
premature bearing and sleeve failure.
2.
Secure hydraulic hoses to prevent chafing against other parts.
3. Upon reception of your new Snow Blower and after 20 operational hours, re-torque all
the bolts.
4. Tighten and check bolts prior to operating and then every 3-4 hours of operation.
Schedule
Procedure
Before
each use
After
each use
After every
3hrs
After every
20hrs
Refer to
tractor
manual
Hardware
– Tighten.
Lubrication Points
– Lubricate with
high-quality grease.
Clear all parts of accumulated mud
or snow.
Summary of Contents for Drop Spreader DS44
