4 |
P a g e
15LB BENCH POTATO PEELING MACHINE
The Metcalfe 15lb (6.8 Kg) potato peeling machine is constructed from food grade,
non-corrosive aluminium alloy castings, with the spindle housing and chute cast
integrally, eliminating joints and possible leakage.
FEATURES
Constructed from food grade, non-corrosive, aluminium alloy castings
Spindle housing and chute cast integrally, eliminating joints and possible leakage
Sink-top/counter-top, pedestal or trolley mounted
Complies with all relevant safety standards and designed for ease of maintenance
and cleaning
No lubrication is required. All bearings are grease packed and permanently sealed
V-belt driven for noiseless transmission, with provision for belt tensioning if
required
Rotor plate coated on both sides, doubling its life. Fine grained abrasive for new
potatoes on one side and coarse grained for old potatoes on the other
Inside wall of peeling chamber has patented cast-in abrasive serrations which
dispenses with the need for abrasive coating. Consequently there is less potato
loss during both peeling and boiling and the efficiency of the serrations will last the
life of the machine
Top casting removable without tools so that the rotor plate can be lifted out. Turn
on water and the whole machine is flushed clean. Cleaning should be carried out
on a daily basis
Water inlet. Hose union with nozzle and provision for fitting on either side
Water outlet. Tapped 1½" BSP ready for waste pipe to be connected. Provision for
fitting on either side
TECHNICAL SPECIFICATIONS
Weight
(kg)
Capacity
(kgs)
Electrical
Supply
Power
(hp)
Dimensions
(mm) H x W x D
30
6.8
230V 50Hz
0.33
446 x 354 x 576
